SCEC Endorsed Products

ASSA ABLOY has a wide range of SCEC endorsed products available under the ABLOY and Lockwood brands. These are categorised by the SEEPL security threat levels described below.

The Security Construction and Equipment Committee (SCEC) is a standing interdepartmental committee responsible for the evaluation and endorsement of security equipment for use by Australian Commonwealth departments and agencies.

ASIO's T4 Protective Security directorate, on behalf of SCEC, evaluates protective security products to determine their suitability for use in Australian Government facilities. Approved products are listed in the Security Equipment Evaluated Products List (SEEPL).

SEEPL categorises products into four levels that indicate the relative ‘security strength’ of the item for use in Government applications. SL4 products offer a high level of security while SL1 products offer the lowest acceptable level of security for Government use.

SL4 High Threat

The following products are SCEC Endorsed for SL4 High Threat level areas. The highest level available.

Padlocks

Lockwood Padlocks

270S70/125 Certificate
290S84/120 Certificate

SL3 Medium Threat

The following products are SCEC Endorsed for SL3 Medium Threat level areas

SL2 Low to Medium Threat

The following products are SCEC Endorsed for SL2 Low to Medium Threat level areas.

Padlocks

SCEC does not classify padlocks rated SL2 or SL1.  SCEC has published a Security Equipment Guide for Padlocks (SEG-028). This guide recommends commercial grade padlocks that meet AS 4145.2:2002 grade SP6 should be considered acceptable for use in Security Zones One, Two, Three.

Listed below is a variety of ABLOY and Lockwood padlocks that meet AS 4145.2:2002 grade SP6 or above.


ABLOY PROTEC2 Padlocks

PL330T/25
PL330T/50



ABLOY PROTEC Padlocks

PL330N/25
PL330N/50

 

Lockwood Padlocks

120N/45/127
120N/50/132
120N/60/135
130/70/125
215A40/619
334B45/119
334B45/125
334B45/138
334B45/148
334S45/519
334S45/538
334S45/548
334S45/590
334C45/519
334M45/619
334M45/638
334M45/648
334M45/690
301/63/154
356M63/625
356M63/650

SL1 Low Threat

The following products are SCEC Endorsed for SL1 Low Threat level areas.

Padlocks

SCEC does not classify padlocks rated SL2 or SL1.  SCEC has published a Security Equipment Guide for Padlocks (SEG-028).  This guide recommends commercial grade padlocks that meet AS 4145.2:2002 grade SP6 should be considered acceptable for use in Security Zones One, Two, Three.

Listed below is a variety of ABLOY and Lockwood padlocks that meet AS 4145.2:2002 grade SP6 or above.


ABLOY PROTEC2 Padlocks

PL330T/25
PL330T/50



ABLOY PROTEC padlocks

PL330N/25
PL330N/50

 


Lockwood Padlocks

120N/45/127
120N/50/132
120N/60/135
130/70/125
215A40/619
334B45/119
334B45/125
334B45/138
334B45/148
334S45/519
334S45/538
334S45/548
334S45/590
334C45/519
334M45/619
334M45/638
334M45/648
334M45/690
301/63/154
356M63/525  
356M63/550  

Legacy Key System

SL2 (Legacy) Low to Medium Threat

The following products are SCEC Endorsed for SL2 (Legacy) Low to Medium Threat level areas.

Keying Platforms (Cylinders)

Lockwood MT5 Cylinders

 

001MT5/SC Certificate  
201MT5+SC Certificate
334MT5+SC Certificate
355MT5+SC Certificate
530MT5+SC Certificate
570MT5+#SC Certificate